| Certification: | ISO9001, CE |
|---|---|
| Salt Rejection Rate: | 98.0% |
| Application: | Industry |
| Capacity: | 1-100t/H |
| Trademark: | huikang |
| Origin: | Shandong |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
Bottled pure water production equipment used in automatic bucket filling machine works:
Bottled pure water production equipment used automatic bucket filling machine using PLC program automatic control, the work process is as follows:
Close the air leakage protection switch and open the emergency stop switch, panel power indicator light, indicating that the machine power, PLC power. Place the "selector switch" in the "automatic" position, press the "start switch" button to control the AC contactor of the drive motor, the machine starts to work. When the empty bottle is inserted into the empty bottle and the bottle is pressed and the empty bottle is detected. (The flushing signal is sent from the empty bottle detection sensor switch in the bottle inlet area.) The bottle drive motor is started and runs through the chain and the bottle Bottle into the flushing and disinfection station. (Wash the bottle after six stations: the first station for the drip, the second, third and fourth stations are washed with disinfectant washing; the fifth station for the water rinse, the sixth station for pure water rinse. When the drive motor with an empty bottle operation, and with the chain of the sensor into the positioning sensor area, the positioning sensor switch the signal to stop the drive motor, while washing the bottle pump start, the corresponding flushing and disinfection work (rinse time by the PLC Program set control); flushing finished, rinse the empty bottle through the bottle conveyor transmission, fall on the bottle rack, push the cylinder cylinder work, the empty bottle pushed to the filling position, so that filling the mouth aligned water bottle (Filling time is adjusted by the user according to the needs), when the filling is full, PLC sends out the control signal, filling the solenoid valve to close, stop the irrigation, filling the end of the filling , Then the next bottle will be filled with water bottles will be sent to the cover cover cover, and sent to the gland area, gland cylinder driven gland press the cap to tighten. So far, a wash irrigation cycle to complete.
Note: Only in the bottle drive motor running before the empty bottle is valid. After the operation of the washing machine, the microcomputer control system takes it as a bottleless treatment, and the machine will not be flushed and will not be filled. If the machine continues to operate, it may cause damage to the equipment.
Bottled pure water production equipment used automatic bucket filling machine features:
1. Suitable for bottle type: 3 gallons of water, 5 gallons of bottled water for use.
2. Full-featured: machine set flushing, filling, capping function in one.
3. Application: mineral water, distilled water, pure water production of the ideal equipment
4. Machine using high-quality stainless steel, corrosion-resistant, easy to clean. The main electrical originals are SIEMENS. OMRON products, pneumatic system imported AirTAC brand-name products. The machine is compact, small footprint, high efficiency and reliable, high degree of automation. Operators only two people, is the electrical three-in-one automatic drum equipment.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}