30 Tons of Softened Water Treatment Equipment

• Customization: Available
• Certification: ISO9001, CE
• Salt Rejection Rate: 98.0%
• Model NO.: HK-30
• Capacity: 50t/H
• Trademark: huikang
• Origin: Shandong

Product Description

Product Details:
Equipment composition and control
Multi-valve automatic water softener system consists of a number of control diaphragm valve (hydraulic or pneumatic), multi-valve controller, resin tank, salt box composition. The controller according to the pre-set procedures were to each hydraulic control diaphragm issued instructions to complete the various channels of the break, so as to achieve the operation of the regeneration process.
Equipment characteristics
1. High degree of automation. Stable operating conditions.
2. Advanced program control device. Run accurate and reliable. Replace the manual operation. Completely realize the water treatment of all aspects of the conversion.
3. High efficiency and low energy consumption. The overall design of the softener is reasonable, so that the exchange of resin can be brought into full play. The equipment adopts the jet type salt. Instead of the salt pump, the energy consumption is reduced.
4. Compact equipment, small footprint, saving infrastructure investment, installation, commissioning, easy to use, stable running parts.
Water requirements
Residual chlorine <0.1ppm turbidity <2 Fe <03ppm
Mn <0.3ppm Total salt content <500 ppm
Construction, installation points
1), the pipeline should be installed to support the force, to prevent the control valve force.
2), water softener into the water pipe from the domestic water pipes, the water pipe to be set on the back to prevent the device.
3), the inlet pressure, such as less than 0.15MPa, the need to use pressure measures.
4), the length of the sewage pipe should be less than 6m; tube does not install the valve; export not higher than the valve body, the terminal openings, so as to avoid siphoning.
5), in addition to the use of hydraulic drive multi-valve water softener, the scene need 220V power supply.
6), can not be used iodized salt, calcium should be used as a renewable agent.
Technical characteristics
1, the new automatic control
Microcomputer processor control equipment automatically water supply, backwashing, salt, regeneration, washing process, can be achieved unattended.
2, continuous and stable water supply
Can be regular, constant flow automatic regeneration, to ensure the production of high quality softened water.
3, reasonable and compact structure
Integrated soft water exchange tank and control valve, saving installation space, to further improve operational reliability.
4, multi-functional brine system
Can automatically dissolve salt, automatic salt absorption, automatic adjustment of salt liquid level, to ensure reliable automatic regeneration.
5, uniform water distribution system
Can provide uniform water within the tank to ensure efficient use of resin to prevent resin loss
6, superior corrosion resistance
Avoid regeneration of the equipment and harsh environments
7, low energy consumption
Water consumption <2 grams of water, salt consumption <100g / mmol, power consumption 10W ~ 40W, power consumption is equivalent to the general softened water equipment 1%
8, flexible design selection
Optional single tank, multi-tank system, time, flow control mode; one with a prepared, alternate regeneration and other operating methods.